[svlug] cdrecord and SuSe 9.1

Brian Bilbrey bilbrey at orbdesigns.com
Mon Sep 20 18:39:04 PDT 2004


Richard Evans wrote:
  ...
>   cdrecord: No such device or address. Cannot open 
> '/dev/hdb'. Cannot open SCSI driver.
>   cdrecord: For possible targets try 'cdrecord 
> -scanbus'. Make sure you are root.
>   cdrecord: For possible transport specifiers try 
> 'cdrecord dev=help'.
> 
> Does anyone have the proper command to burn a cdrom given the facts above?
> 

Did you actually try to run cdrecord -scanbus, as recommended by the
output?

Depending upon how your kernel is configured to boot (look to the
/boot/grub/grub.conf or /boot/grub/menu.lst file), the burner device may
be configured as SCSI (using the hdx=ide-scsi boot parameter) or not.
Additionally, are you sure that the burner in the new laptop is actually
at /dev/hdb? I've seen a lot of those where the HD is /dev/hda, and the
burner is on the other IDE chain, at /dev/hdc.

So, run `cdrecord -scanbus` at the command line. If a burner shows up in
the output on (for example) 0,0,0 on the scsibusN:, then the correct dev
paramter will be:

dev=0,0,0

If no scsi burner device shows up from that first run, try this: run
`cdrecord dev=ATAPI: -scanbus` (mind that colon). If your burner shows
up in THAT output (say, as 0,0,0 again AND say scsibus, but ATAPI above
that, confusingly), then the dev device parameter should be this:

dev=ATAPI:0,0,0

Please note though, that this simply makes your device parameter match
the output of the scanbus check, making things easier to debug when
something goes wrong. I can confirm that my burner, on /dev/hdc, does
work properly with

dev=/dev/hdc

in the cdrecord line. I didn't know that previously, as the cdrecord
docs are all talk about the "bus, target, lun" nomenclature from the
SCSI side of the world, and that's what I've stuck with. It's always
good to learn something new. Thanks!

HTH,

.brian

-- 
Brian Bilbrey : http://www.orbdesigns.com/
   Any sufficiently advanced Operating System
   is indistinguishable from UNIX.
     **Jim Dennis in a TAG answer from the last century.





More information about the svlug mailing list