[svlug] FYI: Getting Dlink DFE 530+ TX working under Linux

[Amit D Chaudhary]

Hi,

Thought I will email the findings incase they are useful to anyone. This
was to get my NIC (Dlink DFE 530+ TX) working under Linux(Redhat 6.1).
My PC is a HP Pavilion running P III 733.
The driver in the floppy is an older one and I did not manage to use it
and get eth0 working using the instructions. Here is what needs to be
done
1. Get the latest driver and the diagnostic program from
http://www.scyld.com/network/rtl8139.html

2. The settings in the Bios have Plug-Play OS is by default enabled. Set
this to be disabled. This takes care of the problem of the driver not
being assigned the correct IRQ. Found this using  rtl8139-diag. The clue
came from an email by Ray Olszewski <ray at comarre.com> in response to a
NIC problem on SVLUG.

3. After 2 following the steps in the readme or using linuxconf gets the
network working. Yeah!

Moving to Linux only soon...

Amit

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com